Table of Contents
Advertisement
10.3 Cool down mode
The setpoints cannot be changed during the cool down process and the heating is switched off. If the
air temperature is more than 100°C when the device is switched on, the device switches automatically
to cool down mode. This mode is indicated in the status display (34) by a corresponding display
symbol.
The cool-down process is finished when the air temperature is less than 60°C for 2 minutes.
If the heating is to be switched on again, you must press the Heating "On/Off" button (31).
10.4 Power saving mode – Eco mode
If no button is pressed for 8 minutes when the heating is switched on, the appliance automatically
switches to power saving mode (Eco mode). This mode is indicated by an appropriate symbol in the
status display (34). In Eco mode, the air temperature is reduced to 350°C to prevent the device and
the environment from heating up unnecessarily.
The Eco mode is ended by pressing the Drive "On/Off" button (30) or the Heating "On/Off" button
(31).
22
Advertisement
Table of Contents
