Hardware Overview; Front View - D-Link DWR-922 User Manual

Section 1 - Product Overview
1 Reset Button
2 SMS LED
3 LAN LED
4 Power LED
5 WPS Button
6 Signal Strength LED
7 2G/3G LED
8 4G LED
9 WLAN LED
D-Link DWR-922 User Manual

Hardware Overview

Front View

1
6
Press this button with an unfolded paperclip and hold for ten seconds to reset the device.
Will be solid green if the SMS inbox is full, or blinking if there is an unread new SMS message.
Will be lit if an Ethernet connection is established, and will blink when data is being transferred.
Will be lit if the device is powered on and working.
Press this button to initiate a new WPS connection. See WPS Button on page 62 for details.
Will blink red if there is no SIM card / signal. Solid red/amber/green indicates the signal strength.
Will be lit if a 2G or 3G connection is established, and will blink when data is being transferred.
Will be lit if a 4G LTE connection is established, and will blink when data is being transferred.
Will be lit if the wireless function is enabled, and will blink when wireless data is being transferred.
2 3 4 5
7 8 9
3