Table of Contents
Advertisement
There are four brightness adjustment modes, namely Manual, Schedule, Auto,
and Auto Adjustment by Hardware. After adjustment is finished, click Save to HW to
save the adjustment results to the hardware.
1.
Manual Adjustment
Select Manual and adjust the brightness by dragging the scroll bar below
Brightness Adjustment or directly modifying the brightness value (the maximum
value is 255) next to the scroll bar.
Display Quality: Includes Soft mode and Enhanced mode. The Soft mode is
generally used for indoor LED displays while the Enhanced mode is used for outdoor
LED displays.
Gamma Adjustment: Includes Mode A and Mode B. The LED display in Mode A
can light up earlier than that in Mode B.
Gain: For chips with current gain function, adjusting the current gain can improve
the chip's current output.
RGB brightness: Adjusts the brightness of Red (R), Green (G) or Blue (B)
separately.
2.
Automatic Adjustment
Chapter 3 LED Display Control Setting
Fig 3-12 Manual Adjustment
31
Advertisement
Table of Contents
