Hide thumbs Also See for AZURA P 8.1L:

Advertisement

Quick guide initial start-up AZURA® Pump P 8.1L
Before unpacking the device, specify the location by taking the following requirements into account.
Ensure that the power plug on the power supply (wall socket or power strip) is always accessible, so that the device
ƒ
can be disconnected from the power supply:
Ensure adequate ventilation around the device to avoid overheating.
ƒ
Place on a firm and even surface.
ƒ
Protect against direct sunlight.
ƒ
Do not expose to air drafts such as air conditioning systems.
ƒ
Do not set up next to other machines that cause floor vibrations.
ƒ
Keep from high frequency sources.
ƒ
Avoid temperature fluctuations.
ƒ
Do not operate the device in a wet room.
ƒ

Unpacking

Bruising danger
The device weighs more than 18 kg. Do not carry
or lift it on protruding housing parts. If it falls, it may
cause injury.
 Lift the device only centrally on the side of the
housing.
 Only carry the device with two people.
Process
1. Orientate the package so that you can read the label.
2. Check the packaging, the device and accessories for transport damages.
3. Check the scope of delivery. In case any parts are missing, contact the Technical Support.
4. If you lift, carry or move the device, make sure to grasp it from below with two people.
Do not hold it on the front cover or the leak tray, as these parts are only loosely attached.

Power supply

Electric shock
Danger of electric shock from damaged cables.
 Make sure that the power cable is not
subjected to high forces.
 The power cable should not be bent or
clamped.
 Make sure that the power cable does not
come in contact with liquids and heat sources.
Use the supplied power cable and plug to meet the specifications. Detachable power cables are not allowed to be
ƒ
replaced with other cable types.
Replace defective cables and plugs only with accessories from KNAUER.
ƒ
Quick guide initial start-up, AZURA® Pump P 8.1L (V6771)
Electronic defect
Electronic hazard when using an identically
constructed power adapter from another
manufacturer.
 Only use spare parts and accessories from
KNAUER or a company authorized by KNAUER.
Page 1/2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AZURA P 8.1L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Knauer AZURA P 8.1L

  • Page 1 Use the supplied power cable and plug to meet the specifications. Detachable power cables are not allowed to be ƒ replaced with other cable types. Replace defective cables and plugs only with accessories from KNAUER. ƒ Quick guide initial start-up, AZURA® Pump P 8.1L (V6771)
  • Page 2 Switching on the pump Device defect Component defect Changes of the environmental temperature cause Possible damage to the pump head due to dry condensation inside the device. running.  Allow device to acclimate for 3 h before connec-  Make sure that solvent fl ows through the pump ting to power supply and taking into operation.

Table of Contents