BDI OLA 8137 Assembly Instructions

Placement and Maintenance

OLA 8137 is designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.

Component List

OLA 8137 is engineered for easy assembly. Carefully follow this procedure to prevent any damage.

Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.

Use a blanket on the floor to protect cabinet during assembly.

For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.

For all other concerns, please contact your BDI Retailer.

A - 4mm Hex Driver x 1

B - Phillips Screwdriver x 1

C - 1/4-20 x 25mm

D - 1/4-20 x 60mm

E - Cabinet x 1

F - Metal Leg x 2

G - Wood Leg x 1

H - Glass Shelf x 1

I - Wood Shelf x 2

J - Back Panel x 2

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws.

BDI are trademarks of Becker Designed, Inc.

OLA 8137 Rev: 06-28-11

OLA

8137

To Attach Base Legs

To Adjust Doors

Screw x 16

Screw x 2

BDIUSA.COM

ASSEMBLY INSTRUCTIONS

CUSTOMERSERVICE@BDIUSA.COM

Table of Contents

Do you have a question about the OLA 8137 and is the answer not in the manual?

Page 1 CUSTOMERSERVICE@BDIUSA.COM Placement and Maintenance OLA 8137 is designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth. Component List OLA 8137 is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Page 2 Step 1 With the help of another person, position the cabinet on it's back. Attach Metal Legs (F) to Cabinet (E) using Screws (C) and tighten with Hex Driver (A) . Attach Wood Leg (G) to Cabinet (E) using Screws (D) and tighten with Hex Driver (A) . Recommended 2-person Step Step 2...
Page 3 Step 3 Adjust Levelers as necessary 2 levelers for each Metal Leg (F) and 1 Leveler for Wood Leg (G) . Step 4 Adjust Door Hinges as necessary Using Phillips Screwdriver (B) adjust hinges as shown below Loosen screws on hinge plate to adjust door up or down Turn screw to adjust door in or out from cabinet Turn screw to adjust door tilt...