36
en | Installing
4.3
Opening the Case
Notice!
To open the AMC2-4R4, first remove all pluggable connectors.
The AMC2-4R4 case consists of a top cover mounted with a two-point snap-in closure on a
chassis. To open the case, push down the two snap-ins with a screwdriver, then swing the
cover down.
Notice!
To open the AMC2-4W , first remove all pluggable connectors.
The AMC2-4W case consists of a top cover mounted with a two-point snap-in closure on a
chassis. To open the case, push down the two snap-ins with a screwdriver, then swing the
cover down.
Figure 4.5: Opening the AMC2 case
Figure 4.6: Opening the AMC2-2R2 case
2020-01 | V02 |
Installation manual
Access Modular Controller 2
Bosch Access Systems V.B.