74
en | Installing
Figure 4.59: Location of the RS-232 interfaces for external devices
Figure 4.60: Location of the RS-232 interface for external devices
The interface is a point-to-point connection. You can connect only one reader. The cable
length is limited to 15 m (49 ft).
Notice!
A complete connection diagram of the RS-232 interface is shown in , page 116.
Notice!
A complete connection diagram of the RS-232 interface is shown in chapter Connecting
Diagrams, page 102
2020-01 | V02 |
Installation manual
Access Modular Controller 2
Bosch Access Systems V.B.