Access Modular Controller 2
Figure 4.66: Location of the relay output connectors
Each relay output can operate in 'wet' mode, using the AMC2-4R4's internal 12/24 Vdc power
supply for external devices or 'dry' mode with potential free contacts for externally powered
systems.
Figure 4.67: Wet mode and dry mode of the AMC2 relay outputs
Each relay output can operate in 'wet' mode, using the AMC2-4W 's internal 12/24 Vdc power
supply for external devices or 'dry' mode with potential free contacts for externally powered
systems.
Figure 4.68: Wet mode and dry mode of the AMC2 relay outputs
Bosch Access Systems V.B.
Installation manual
Installing | en
77
2020-01 | V02 |