Installation
6 A / 6 0 A . 1 6 V / 8 0 V . 3 0 0 W
6 A / 6 0 A . 1 6 V / 8 0 V . 3 0 0 W
2 A / 2 0 A . 1 6 V / 8 0 V . 1 0 0 W
2 A / 2 0 A . 1 6 V / 8 0 V . 1 0 0 W
M A I N F R A M E
Figure 2-6 Parallel Connection
2.6
Remote Control Connection
The remote operation of Load can be done through GPIB or RS-232C. These connectors on
the rear panel connect the Load to the controller or computer. The GPIB interface of the
electronic load is optional. The 6330 series Remote Controller can control load through
RS-232C port. Connect the Remote Controller to the Electronic Load before powering it on.
If you have not done this, Load will shut down, or the fuse for remote controller in Mainframe
will be broken.
2-7