Table of Contents
Advertisement
Index function
The cassette tape may be recorded using the tape
indexing feature for the rapid location of any
section.
To record using the indexing feature
Record as usual.
Each time you press the Record
button to begin recording, an index signal is
recorded on the tape.
The index signal is only recorded on the tape
when you first begin to record.
If you use the
pause feature between different recorded
programmes no new index signal will have been
recorded.
Press the stop button and then record
between different recordings.
Controls
TV Screen
To locate a programme using the index feature
The index function lets you view the first few
seconds of all recordings on the tape. This also
allows you to jot down details of all recordings on
the tape easily.
To locate a programme using the index feature,
turn the VCR on and insert a cassette which was
recorded using the tape indexing feature, then
operate as follows.
INDEX
INDEX
Press the INDEX button when a cassette is loaded
and the VCR is in the stop mode.
Press the <K or co button.
The tape will be rewound or fast forwarded until
an index mark is detected.
When the VCR has located an index mark, it will
enter the play-back mode for approximately 15
seconds.
This is long enough for you to
recognize the programme.
The VCR then winds
the tape to subsequent index marks in sequence.
When you see the programme you want to watch,
press the [> button to start play-back.
The INDEX indicator will disappear from the TV
screen.
37
ADD
OPE
Advertisement
Table of Contents
