Hitachi VIDEO plus+ VT-M430E(UK) Instruction Manual page 33

Recalling and clearing the programme from the VCR's memory
Controls TV screen
1 Turn the VCR and TV on.
VIDEO Be sure that the TV is set to the video programme
PROGRAMME number.
NUMBER
Press the MENU button.
The OSD menu appears on the TV screen.
Press the GD button (PROG. REVIEW).
The TV screen will display the information you
entered for the lowest programme number for 10
seconds.
Press @ again if you want to view the next
programme information immediately.
To clear a programme, press the @) button
when the programme information you want to
clear is displayed.
One event's timer programme data is erased from
the VCR's memory when the timer recording is
finished, but daily and weekly programmes
remain in the VCR's memory even after the timer
recording is finished.
5 When you finish reviewing the programmes,
press the MENU button to switch off the on-
screen display.
Programme priority
Example 1: When the programme start time is Example 2: When the programmes overlap, the
the same for more than one programme on the earlier programme has priority.
same day, they are recorded in the order of
Programme 1, 2, 3 .... 8.
Programme 2 + :
7:00 8:00 9:00 10:00 11:00 7:00 8:00 9:00 10:00 11:00
7:00 — 8:00 Programme 1 7:00 — 9:00 Programme 2
8:00 — 9:00 Programme 2 9:00 — 10:00 Programme 1
9:00 —- 10:00 Programme 3 10:00 — 11:00 Programme 3
10:00 — 11:00 Programme 4 11:00 — Programme 4
Programme 1 is executed as programmed, and Programme 2 is executed as programmed, and
Programme 2, as illustrated, after Programme 1, Programme 1, as illustrated, after Programme 2,
and Programme 3, as illustrated, after and Programme 3, as illustrated, after
Programmes 1 and 2, and Programme 4, as Programmes 2 and 1, and Programme 4, as
illustrated, after Programmes 1, 2 and 3. illustrated, after Programmes 2, 1 and 3.
33
v
2
iS)
q
oc
Lu
a
Cc
c v;
di
a