Searching For Tape Position With The Picture (Picture Search); Still Picture; Searching For Tape Position Without The Picture (Wind And Rewind); Easy View - Hitachi VTMX910EUK Operating Instructions Manual

When you put in a cassette the video recorder must first
calculate the time played. Therefore, '-:--' appears first and
only after the tape has been running for a few seconds the
playing time will be shown.
6
To end, press .
MENU
Searching for tape position with the picture
(picture search)
1
While a cassette is playing, press
(forward) once or several times.
I
This will, for example, appear in the display.
2
To stop a certain place on the tape, press
Note: During picture search, the picture quality may not be
so good and there will be no sound.

Still picture

1
Press . A still picture will appear on the
STILL R
screen.
This will, for example, appear in the display.
2
Each time you press
STILL R
move on one step.
Note: Interference stripes may appear on the screen during
still picture.
Searching for tape position without the
picture (wind and rewind)
1
Stop the tape with
h
2
Press (reverse) or
H
This will, for example, appear in the display.
3
To stop a certain place on the tape, press
(reverse) or
H
0:30:
21
.
G
0:00:
21
again, the picture will
.
(forward).
I
0:30:
02
.
h

Easy View

With this function you can switch to picture search during
wind and rewind.
1
If you hold (rewind) or
H
rewind, you will switch to picture search.
2
When you release the button, the video recorder will
automatically switch back to rewind or wind.

Tape Finder

Automatic search for a tape position
(index search)
At the start of each recording, the video recorder will write an
index code on the tape.
1
Press and then
INDEX E
code mark or
INDEX E
code mark.
This will, for example, appear in the display for the next
index code.
2
When the video recorder finds the code mark, it will
automatically switch to play.
Automatic search for a blank space on the
tape
You can search for a space on the tape (at least 1 minute of
blank tape) for a new recording, for example, after an existing
recording on the tape.
1
Press . Then press
INDEX E
This will, for example, appear in the display.
2
When the video recorder find a blank space, it will
automatically switch to 'pause'.
Note: If no empty space has been found when the end of the
tape is reached, the cassette will be ejected.
(wind) during wind or
I
button to select the next
I
and then for the previous
H
0:30:
02
.
h
0:00:
00
13