Hitachi VIDEO plus+ VT-M430E(UK) Instruction Manual page 50

Brand
Type
Press the stop [(_] button.
Press and release the play [> button.
If the satellite receiver programme number still
does not change to "12", press the play [>
button again. Repeat this step until the
programme number changes to "12".
If your satellite receiver does not work after
entering the code shown, please try an alternative
code from table.
Note: With some satellite receivers, the
programme number may not change to "12" even
if the code is correct. Read the instruction manual
of your satellite receiver carefully and set up the
receiver correctly, then perform the above
operation.
50
After programming the system control code,
press the MENU button to return to normal
operating mode.