Table of Contents
Advertisement
Start point: Turn the TV set on and select the
video porgramme number (described on page 11).
Controls
VCR's Display
Insert a cassette.
Note:
Be sure to check that the safety tab is not
missing. If it is removed, the VCR is set to the
play-back mode automatically.
ts
20.086 eld
;
Select the programme to be recorded by pressing
the PROG, TV PROG buttons or two number
buttons.
Make sure the VCR indicator lights in the VCR's
display for viewing video via the Scart connector
lead.
If not, press the VCR/TV button on the
handset so that it lights.
Press the DISP. button.
The on-screen display will appear on the TV
screen.
Press the SP/LP button to select the recording
speed.
Press the REC or REC/IRT button.
Now, recording starts.
if you want to avoid recording unwanted material,
press the © button.
Press the button again to
continue recording.
To prevent tape damage, the VCR will
automatically switch from record/pause to the stop
mode after about 5 minutes.
23
BAS
OPE
Advertisement
Table of Contents
