Table of Contents
Advertisement
TO CHECK ADJUSTMENT :
Eliminate the throttle cable free-play by
pressing the throttle lever until a slight
resistance is felt then hold in place. The
aligning marks on the pump casting and
lever must align perfectly. If not contact
your dealer.
Injection pump should be adjusted by
your authorized dealer.
A003 003 008
,.,. CAUTION : The carburetor must
T
be adjusted before adjusting the
oil injection pump. Make sure the idle
speed is 1800-2000 RPM.
Fan Belt
Inspect belt for cracks, uneven wear,
etc. Check fan belt tension, 10 mm
(3/8 in) should exist when deflection is
correct.
34 -------------------------
10 mm (3/8 in)
belt deflection
A017 002 011
If belt seems damaged or if tension is in-
correct, contact your authorized dealer
immediately.
+
WARNING : If fan protector is
removed, always reinstall after
servicing.
Headlamp Beam Aiming
To adjust, remove the four caps, turn
upper or lower adjusting screws to ob-
tain desired beam position.
A007 004 002
Adjusting
screws
screws
Advertisement
Table of Contents
