Table of Contents
Advertisement
Turn off the oven and wait until
it is cold.
Step 1
Turn on the oven.
Option
Quick
Normal
Intense
When the cleaning starts, the oven door is locked and the lamp is off.
To stop the cleaning before it is completed, turn off the oven.
The oven stays locked until it is cold.
Turn off the oven and wait until it
is cold.
12.4 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Step 1
Fully open the door.
Step 2
Lift and press the clamping levers
(A) on the two door hinges.
Step 3
Close the oven door to the first opening position (approximately 70° angle). Hold the door at both
sides and pull it away from the oven at an upwards angle. Put the door with the outer side down on
a soft cloth on a stable surface.
Before the Pyrolytic Cleaning:
Remove all accessories and remova‐
ble shelf supports.
Step 2
Press: Menu / Pyrolysis.
Cleaning mode
Light cleaning
Normal cleaning
Thorough cleaning
When the cleaning ends:
Clean the cavity with a soft cloth.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
a mild detergent.
Step 3
Set the cleaning mode. Press:
Duration
1 h
1 h 30 min
3 h
Remove the residue from the bottom of
the cavity.
CAUTION!
Carefully handle the glass,
especially around the edges of
the front panel. The glass can
break.
A
.
A
ENGLISH
39
Advertisement
Table of Contents
