Driver Configuration; 3.1. Checking Printer Properties; 3.2. Changing Printer Properties; Pic.90 Printer Properties 1 - idp SMART-50 Instruction Manual

Id card printer

Table of Contents

3. Driver configuration

To check printer properties, you need to open printer driver. Please open "Drivers

and Printers" and right-click "IDP SMART-50 Card Printer". Click "Properties". For

Windows 7, please click "Printer Properties".

In the general tab shown as Pic.89, you can check the printer model and

specifications.

When you click "Printer Properties" as like

Pic.88, a device driver of "IDP SMART-50

Card Printer" is shown.

3.2.1. Printing Preferences

Please click "Printing Preferences" shown on the

bottom of Pic.89.

There are 3 tabs of "Layout", "Paper/Ribbon /Quality"

and "Side/Media".

(You can set the options for printing shown on

Pic.90.)

Table of Contents

Smart-50 dualSmart-50 liteSmart-50 rwSmart-50 laminator