Peplink Balance 20X - peplink PEPWAVE Balance One User Manual

6.4

Peplink Balance 20X

6.4.1 Panel Appearance
6.4.2 LED Indicators
The statuses indicated by the front panel LEDs are as follows
Status
Green LED
Orange LED
Port Type
Wi-Fi AP
https://www.peplink.com
Power and Status Indicators
OFF – Upgrading firmware
Red – Booting up or busy
Blinking red – Boot up error
Green – Ready
LAN and WAN Ports
ON – 1000 Mbps
OFF – 10 / 100 Mbps or port is not connected
Blinking – Data is transferring
OFF – No data is being transferred or port is not connected
Auto MDI/MDI-X ports
Wi-Fi AP Indicators
OFF Disabled
ON Enabled
:
27 Copyright @ 2022 Peplink