Torch And Liner Maintenance - ESAB Rogue EMP 210 PRO Instruction Manual

7 MAINTENANCE
7.3

Torch and liner maintenance

Torch and liner cleaning procedure:
1) Disconnect the power source from the input power receptable.
2) Open the spool side door and release the tension from the pressure roller by turning the tension
screw counterclockwise and move it outward.
3) Remove the wire and the wire bobbin.
4) Remove the torch from the power source and remove the contact tip and nozzle.
5) Clean the liner by blowing low-pressure dry compressed through the end of the liner that was
mounted closest to the power source.
6) Re-install contact tip and nozzle.
0447 978 001 - 32 - © ESAB AB 2023