Ultriscape Overview; Ultrisync Overview; Ultriclean Overview; Ultrisrc Overview - Ross ULTRIX-MODX-IO User Manual

UltriScape Overview

Ultriscape is the integrated Multiviewer for Ultrix routers. Use the Ultriscape Layout Editor to
manage the layouts and the Ultriscape Head page to assign sources to the Ultriscape Head outputs.
You must have at least one Ultriscape license key installed to access the Ultriscape interfaces.
Keep the following in mind when configuring the Ultriscape features on an ULTRIX-MODX-IO blade:
• Each Ultriscape license enables one Multiviewer Head (output) per slot.
• Each slot supports up to three Multiviewer Heads.
For More Information on...
• the Ultriscape Head designations of the ULTRIX-MOD-SFP, refer to "ULTRIX-MOD-SFP".
• configuring Ultriscape, refer to the Ultriscape User Guide.

UltriSync Overview

UltriSync allows the re-timing of asynchronous or time offset input signals to the frame reference.
UltriSync is a per input feature and requires a license for each input that will be used by the
UltriSync.
Keep the following in mind when configuring the UltriSync features on an ULTRIX-MODX-IO blade:
• The UltriSync license allows for SDI data rates up to 3Gbps (1080p).
• The UltriSync-UHD license allows the Frame Sync to operate at up to 12Gbps (2160p) data rates.
This license is available on 3 inputs per blade (AUX B or the first input of each module).
For More Information on...
• configuring the UltriSync feature, refer to the user guide for your router.

UltriClean Overview

UltriClean allows users to enable a Clean Switch mode and apply a line buffer (delay) on a per
output basis. Incoming video is buffered based on the timing of the input, and is then output based
on the timing of the router system reference (including any offsets added in the Triggers setup).
Users can then switch between inputs that are not perfectly co-timed without perceiving any
glitches of the incoming data. Video source timing must remain within the buffer to properly switch
between sources (buffer depth is user-configurable).
For More Information on...
• configuring the UltriClean feature, refer to the user guide for your router.

UltriSRC Overview

The UltriSRC license is a per port license enabling Sample Rate Conversion for MADI audio inputs.
The sample rate conversion will re-sample incoming MADI up to 48kHz. This supports MADI sources
that are not reference locked to the router.
For More Information on...
• configuring the UltriSRC feature, refer to the user guide for your router.
42 • Configuration ULTRIX-MODX-IO User Guide (v1.0)