Chapter3 Operator Information; General; Operator Tests; Controls And Indicators - Digital Equipment LA50 Technical Manual

3.1 GENERAL
CHAPTER3
OPERATOR INFORMATION
This chapter provides maintenance personnel with a summary of the printer controls and indicators. Figure
3-1 shows their locations and Table 3-1 describes their functions.
3.2 OPERATOR TESTS
If at any time there appears to be a problem in the printer, the operator may start a self-test. There are four
self-tests. Two of the tests provide the operator with a printout. Table 3-2 is a list of the self-test procedures
and the printer component areas under test.
Figure 3-1 Controls and Indicators
3-1