Operator Control Panel Switches And Indicators - Digital Equipment LG06 Operator's Manual

Operator Control Panel Switches and Indicators

The operator control panel switches and indicators are illustrated in Figure 2.
The functions of the switches and indicators are listed below.
Control Panel
Switch / NOTE: Only the ON LINE switch operates when the printer is on–line.
Indicator
Status Lamps Illuminate when printer is on–line. Flash alternately to indicate a fault condition. Off when printer is
off–line.
Message Displays on–line/off–line state, configuration menus, and fault conditions.
Display
ON LINE Toggles the printer between on–line and off–line.
FF Press to advance paper to top of form on the next page.
LF Press to advance paper to top of next print line. Press with NEXT switch to advance paper in 1/60 inch
increments.
1st Edition, April 1993
Function
All other switches operate only in the off–line state.
3