1.1.2
Information feedback
1.1.3
Maintenance aspects
1.1.4
Power ON/OFF
1-4
The LB12/LB15 printers return a large amount of essential information to the application
program, including:
•
printer configuration
•
number of characters printed
•
true status of execution
•
error codes.
The mechanical design is such that field replaceable modules can be replaced within five
minutes with no need for mechanical adjustments. The printers also have extensive built-in
test programs, significantly reducing the time spent on repairs.
To reduce the amount of heat generated by the printer, the operator can switch the printer
from ON to STANDBY mode (and vice versa) by using the ON switch at the front of the
printer. The LB12/LB15 can also be switched OFF from the application program. The ON
switch, however, overrides software-controlled switching. The ON LED illuminates when the
printer is switched ON.
There is high voltage inside the PSU even when the printer is switched
off. REMOVE the power cable before you dismantle the PSU.
LB12/LB15 Field Support Manual
WARNING!
9710