Table of Contents
Advertisement
TROUBLESHOOTING THE PRINTER
Operator Checklist
Try to correct the trouble as listed below.
CAUTION:
Always turn off the printer before you attempt to correct a
problem.
If you cannot correct the trouble:
Turn off the printer and contact your dealer or the nearest DIGITAL
service technician.
Trouble
Printer does not
start when power
is turned on.
No printout. FAULT
light is on. Pressing
the READY button
causes printer to
print one line.
Probable Cause
Power cord not
connected, or
broken
Power source
fault
Fuse open
Printer out of
paper
No printout.
Access cover open
FAULT light is on.
READY light is out
and pressing the READY
button does not start
printer.
Corrective Action
Check power cord
connections; check power
cord for damage.
Check power at power
receptacle.
Make sure fuse is in
place. Replace fuse if
blown. Refer to Fuse
Replacement.
Reload paper and press
the READY button.
Close cover and press
the READY button.
Advertisement
Table of Contents
