Right Margin; Baud Rate Select - Digital Equipment LA50 Technical Manual

Table 2-4 XON/XOFF and Ready /Busy Protocol
Digital systems use XON/XOFF protocol. Other systems may require Ready /Busy protocol. Switch
SW 1-6 selects the protocol. Switch SW 1-7 selects the ready and busy signal levels.
Protocol
XON/XOFF
Ready/Busy
Signal Level
Busy= High
Ready= Low
Busy= Low
Ready= High
* factory setting
Table 2-5 Right Margin
SWl-6 Position
Open*
Closed
SW 1-7 Position
Open*
Closed
Switch SW 1-8 selects the method of controlling a line of characters that exceeds the eight inch line of print.
If set to truncate, the printer prints only the first eight inches of characters and drops the remaining charac-
ters. If set to wrap, the printer prints the remaining characters on the next line.
Selection
Truncate
Wrap
* factory setting
SWl-8 Switch Position
Open*
Closed
Table 2-6 Baud Rate Select
Switches SW2-1 through SW2-3 select the speed (bits per second) at which the printer communicates with
the computer.
Baud Rate
4800
2400
1200
600
300
200
110
* factory setting
SW2-1
Open
Open
Open
Closed
Closed
Closed
Closed
Switch Positions
SW2-2
Open
Closed
Closed
Open
Open
Closed
Closed
2-12
SW2-3
Open (factory setting)
Open
Closed
Open
Closed
Open
Closed