Power Up And Checkout; Single Sheet Paper Insertion - Digital Equipment LA50 Technical Manual

The following procedure is for installation of single sheet paper.
1. Turn off power.
2. Open paper window.
3. Pull bail bar away from platen.
4. Push paper release lever toward back of printer.
5. Push paper
thr~ugh
slot in paper cover and guide it to front of platen. Align paper (Figure 2-7).
6. Pull paper release lever toward front of printer.
7. Push bail bar against platen.
8. Close paper window.
9. Turn platen knob to reposition paper.
2.5.3 Power Up and Checkout
Use this procedure to power up the printer and verify that it is operational.
1. Set the power switch to 0.
2. Plug the ac power cord into the ac power receptacle on the rear of the printer (Figure 2-8).
ALIGN PAPER
r-----___,,,._
SLOT
PAPER
COVER
Figure 2-7 Single Sheet Paper Insertion
2-8
PLATEN KNOB
/
MA-10,013A