Table of Contents
Advertisement
DINION 5100i IR
2
System overview
Note: None of the pages are accessible until after you set a service-level password.
When a connection is established, the Live page is initially displayed.
The application bar displays the following icons:
2.1
Live
The Live page is used to display the live video stream and control the unit.
2.2
Playback
The Playback page is used for playing back recorded sequences.
2.3
Configuration
The Configuration page is used to configure the unit and the application interface.
Making Changes
Each configuration screen shows the current settings. You can change the settings by entering
new values or by selecting a predefined value from a list field.
Not every page has a Set button. Changes to pages without a Set button are set immediately.
If a page does show a Set button, you must click the Set button for a change to take effect.
Notice!
i
Save each change with the associated Set button.
Clicking the Set button saves the settings only in the current field. Changes in any other fields
are ignored.
Some changes only take effect after the unit is rebooted. In this case, the Set button changes
to Set and Reboot.
1.
Bosch Security Systems B.V.
Live
Playback
Configuration
Dashboard
Links
Logout
Make the desired changes.
Click this icon to view the live video stream.
Click this icon to play back recorded sequences.
This link is only visible if a storage medium has been
configured for recording. (With VRM recording, this
option is not active.)
Click this icon to configure the device.
Click this icon to see detailed system information.
Click this icon to navigate to the Bosch download store.
Click this icon to log out of the device.
Click this icon to get context-sensitive help for the page
you are browsing.
User manual
System overview | en
2023-08 | V01 | F.01U.393.997
7
Advertisement
Table of Contents
