Bosch DINION 5100i IR User Manual page 16

16 en | Configuration
Show VCA metadata
When video content analysis (VCA) is activated, additional information is displayed in the live
video stream. With the MOTION+ analysis type, for example, the sensor fields in which motion
is recorded are marked with yellow rectangles.
Using Essential Video Analytics or Intelligent Video Analytics, the outlines of detected objects
are displayed in following colors:
–
–
–
Show VCA trajectories
When this option is activated, the trajectories (motion lines of objects) from the video content
analysis are displayed in the live video image if a corresponding analysis type is activated. The
trajectory is shown as a green line following the object base point.
Show overlay icons
Select this check box to show overlay icons on the live video image.
Show VCA items
Select this checkbox to show VCA items on the live video image.
Shows alarm fields, lines and routes configured for the video analytics in the following colors:
–
–
Show 'Dashboard'
Select this checkbox to enable the Dashboard in the application bar.
Secure cookies
Select this checkbox to secure the cookies sent through the camera.
Notice!
i
If cookies are secured, authentication forwarding to MPEG ActiveX and the Video Security
App is prohibited.
HTTP referrer check
Select this checkbox to enable the HTTP referrer check.
Video player
Select the type of player to be used for live mode viewing.
Latency mode
Select the required latency mode:
–
–
–
2023-08 | V01 | F.01U.393.997
Red: Objects that generate an alarm event under the current settings appear on the
camera image inside a red outline.
Orange: An object that has triggered one alarm event but does not generate another
appears inside an orange outline (example: object has crossed a line). During forensic
search, an object that triggers an alarm event has an orange outline from the beginning.
Yellow: Objects that are detected as moving but do not generate an alarm event under
the current settings appear inside a yellow outline.
Green: Fields, lines and routes used in a task are displayed in green. They can be edited
but not deleted.
Red: Fields, lines and routes currently in alarm mode are displayed in red.
Low delay: Default mode. Provides marginal buffering to display fluent video under
normal network conditions.
Smooth video: Allows the buffer to automatically adjust to cover network jitter, inducing
higher latency.
No buffering: Shows video as it is received by the decoder with minimum latency. Allows
the video to jerk if there is network jitter.
User manual
DINION 5100i IR
Bosch Security Systems B.V.