Table of Contents
Advertisement
HOW TO USE HEART RATE PROGRAMS
CAUTION: ifyou have heart
prob-
]ems, or if you are over 60 years of age and
have been inactive, do not use the heart rate
programs, if you are taking medication regu-
larly, consult your physician to find whether
the medication will affect your exercise heart
rate.
D
Put on the optional chest pulse sensor.
You must wear the optional chest pulse sensor
(see page 23) to use a heart rate program. See
the instructionsincludedwith the chest pulse
sensor.
B
Insert the key fully into the console.
See HOW TO TURN ON THE POWER on
page 12.
B
Select a heart rate program.
When the key is in-
serted, the manual
mode will be selected.
To select a heart rate
program, press the
Program Select button
repeatedly until one of the two heart rate program
indicators lights.
The diagrams beside the heart rate program indi-
cators show how the target heart rate will change
during the programs. Dudng the 85% Max pro-
gram, your heart rate will reach approximately
85% of your estimated maximum heart rate; dur-
ing the Self Select program, your heart rate will re-
main near a level that you selecL Note: Your esti-
mated maximum heart rate is determined by sub-
tracting your age fi'om 220. For example, if you
are 30 years old, your estimated maximum heart
rate is 190 beats per minute (220 - 30 = 190).
11
B
B
During heart rate pro-
grams, the matrix will
show a moving graphic
that represents your
heart rate. Each time a
heartbeat is detected,
an additional peak will
appear.
Enteryourage.
When a heart rate pro-
gram is selected, the
word "AGE" and the cur-
rent age settingwill flash
in the Calories/Pulse
display. If you have al-
0
CALOR
ES
0
PULSE
ready entered your age, simply press the Enter
button. If you have not entered your age, press
the increase and decrease buttons beside the
Enter button to enter your age. Then, press the
Enter button.
Enter a maximum
speed.
After you have entered
your age, the letters
"SPd" and the maximum
speed setting of the pro-
gram will flash in the
Speed display. If de-
MPH
I
SPEED
sired, press the increase and decrease buttons
beside the Enter button to adjust the maximum
speed setting. When the desired settingis shown,
press the Enter button.
If the 85% Max program is selected, go to step
7. If the Self Select program is selected, go to
step 6.
Enter a target heart rate.
The letters "PLS" and
the target heart rate set-
ting for the program will
flash in the Calories/
Pulse display. If desired,
press the increase and
'-"51 I
I-L
0 CALORIES
0 pULSE
decrease buttons beside the Enter button to ad-
just the target heart rate setting. When the desired
setting is shown, press the Enter button.
16
Advertisement
Table of Contents
