Save Image; Menus - Fluke Ti300 PRO User Manual

Save Image

To save an image as a data file:
1. Capture an image.
The image is in the memory buffer for you to save or edit the image.
2. Push  to save the image as a file and go back to the live view.

Menus

Use the menus to change and view settings.
To change settings:
1. Push  /  to select an option.
2. Push  to set the option.
The primary, secondary, and option menus close 10 seconds after the last push of a function button. The option
selection menu stays open until you make the selection, go up a menu level, or cancel the action.
When the Imager is in Gas Detection mode, some functions will be disabled. They will not be selectable.
Table 7 lists the secondary menus available in the Primary Menu.
Secondary Menu
Measurement
Image
Camera
Memory
Fluke Connect
Settings
SF6 Gas Detection
Mode
Table 7. Primary Menu
Set the calculation and display of radiometric temperature measurement data
related to the thermal images.
Set features used to show infrared images on the display and in some saved
image and video files.
Set options for secondary camera features.
Select to review and delete captured images and videos.
Select to pair the Imager to the Fluke Connect app on a mobile device or to other
Fluke Connect tools.
The Fluke Connect system is not available in all countries.
Set user preferences and to view information about the Imager.
Set options for gas-detection features.
Professional Series Thermal Imagers
Description
Note
Menus
11