Ir-Fusion Tm Technology - Fluke TiS55+ User Manual

TiS55+/TiS75+
Users Manual
IR-Fusion
IR-Fusion TM technology makes it easier to understand, analyze, and communicate infrared
images through the use of an aligned visible image and infrared image. The Imager
automatically captures a visible image with every infrared image to show you precisely
where a potential problem might be, and then allows you to more effectively communicate it
to others.
The visible image and infrared image can be customized or separated in SmartView
and Fluke Connect Software when you use the .is2 or .is3 file format. See
Menu.
The IR-Fusion slider bar sets the Product to take images from full visible light mode to full
IR-Fusion mode. Use a blend between visible light mode and IR-Fusion to view an object
with some temperature overlays.
To adjust the IR-Fusion level:
A
1. Tap .
2. Use the slider bar to set the IR-Fusion level.
Alternatively, you can adjust the IR-Fusion level in camera mode:
With Level/Span set to Auto, push
Or,
Touch the display and slide left to right to increase the level of IR-Fusion. Slide from right
to left to decrease the IR-Fusion level. See
16
1.800.561.8187
TM
Technology
Figure 2. IR-Fusion Level
www.
Note
Y Z
or to change the IR-Fusion level.
Figure 2.
.com
Settings
information@itm.com