Limit Switch - DKN SMART POWER MACHINE Manual

 Limit switch
Repair Instructions
Use a screwdriver to remove the screws as shown. The figure above shows the
location of the screws of the Travel Switch Assembly, after removing these screws,
the Travel Switch can be removed.
Note that the tightening torque used must comply with the reference values for
the specific type of screw. Otherwise the screws may be permanently damaged.
 Electronic Control Components
Repair Instructions
Use a screwdriver to remove the screws as shown. The figure above shows the
location of the screws of the Electronic Control Assembly. After unscrewing these
screws, the Electronic Control Assembly can be removed.
30