Table of Contents
Advertisement
2. Maintenance guide
▓ Before replacing the Circuit Board, you need to remove
Disconnect The Cables.
Before replacing the Circuit Board, also cut off the power to prevent Short Circuit
▓
of the Wire Contacts.
Be careful that the ports of the Cables are properly connected to prevent
components from being burned by plugging into the wrong ports.
Display Replacement Guide
VI.
1. screw position
Travel Switch Assembly
Repair Instructions
Use a screwdriver to remove the screws as shown. The image above shows the
location of the screws that hold the screen in place. Once these screws are removed,
the Display can be removed.
Note that the tightening torque used must comply with the reference values for
the specific type of screw. Otherwise the screws may be permanently damaged.
the Rear Cover and
32
Advertisement
Table of Contents
