Table of Contents
Advertisement
Chapter 8.Commissioning instructions
(factory menu、reset、 upgrade)
1. Software classification
Power station software includes electronic control software and display control
software
1、Electronic Control Software: Motor Control Program, use the RS485
Communication Line for programming and upgrading, and the pre-programming
board needs to be programmed in advance to complete the Boothload software.
(Boothload needs to be burned with an emulator, which is generally unnecessary)
2、Display and control software: display and interactive program software, use
USB Communication Line to burn and upgrade
2. Operation steps
R11 Display Control Line Brush upgrade
1. Follow the instructions in the upgrade document
"R11_Tina_V2.5_PhoenixSuit"to install the host computer software
2. Open the host computer software
3. Use a Special Wire brush to connect one end of the wire to the Motherboard and
the other end to connect to the computer through USB
42
Advertisement
Table of Contents
