Performance Conditions; Table - Tektronix P6231 Instruction Manual

PERFORMANCE CONDITIONS
The electrical characteristics listed in Table 1-1 apply
when a
calibrated probe is used with
a
calibrated oscIllo-
scope system operating within the environmental c0ndi-
tions stated in Table 1-2.
Items listed in the "Performance Requirement" column
are verifiable qualitative or quantitative limits. Items listed
in the "Supplemental Information" column are not verified
in the "Performance Check Procedure" (SectIon 3); they
are either explanatory notes, calibration setup descrip-
tions, performance characteristics for which no absolute
limits are specified, or characteristics that are impractical
to check.
The probe's physical characteristics are listed in Table
1-3.
Table 1-1
Characteristic
Performance Requirement
SuppIementaIlnfonnation
Attenuation lOX
±
1% at de. Probe attached to 11000 series
(system) plug-in.
Input Resistance
4SOO
±
1% at de.- Probe attached
to
11000 series
(system)
plug-In.
Input Capacitance
Less than 1.6
pF.-
Typically 1.3
pF.
See figure 1-1 for
(1 kHz to 1.5 GHz)
a graph of input Impedance
versus
frequency.
1-2
Specification - P8231 REV AUG 1986
o
o
D
n
o
D
D
D
U