Table of Contents
Advertisement
MBT1015 rev-C
Some examples of the Results are shown below are: (Fig. 80 & 81)
Battery: Replace
Rating:
Measured: 129 CCA
Volts:
Int. R:
Life:
Fig.80
9.0 Printing the Test Results from Stored Memory
To print out the previous results from its memory, select [Stored Results] from the
menu. Access to the recorded names (example: Fig.75), select and press
will display the results.
To print just press
Important:
The Analyser has to be connected to a 12V battery in order to work with the
mobile printer. This is because the printer needs higher Amps to operate which
the PC USB output is unable to provide.
Note:
To printout on PC printer, it has to be connected to the PC with BESA-24PM
software installed. (See Print Results from PC Printer – Page 48).
To exit the program, pressing the
the menu screen (Fig.74).
500 CCA
12.85 V
20.91 mOhm
0
%
key on the Analyser, the printer will start printing.
key at any moment will exit and return back to
User's Manual Version 18.08
Result: High Drop
Battery:
12.45V
Min. Volts: 8.56V
Volt Drop: High
Check starter relay,
battery terminals or
battery has aged.
Fig.81
-
44 -
key
Advertisement
Table of Contents
