Matco Tools MBT1015 User Manual page 39

- 39 -
MBT1015 rev-C
___________________________________________________________________________________
6. Once it has finished analysing, it will prompt you with an instruction
(Fig. 69) stating that you have should unclamp the Black tester clip from the
engine or chassis body and transfer to the battery negative [-] terminal within
15 seconds time limit if not the testing procedure has to be repeated again as
the gathered data will be lost.
Fig.69
7. Once the Black clip is clamped onto the battery [-] terminal, the Analyser
display will light up as shown. (Fig. 70)
Fig.70
8. Press
Fig.72
Grounding Test
Now transfer the Black
clip to the battery
[-] post.
The time limit given
is 15 seconds before
the memory is lost.
Grounding Test
[Enter] to proceed.
key as instructed and the display will show as follows (Fig. 71).
Analysing...
Please wait!
User's Manual Versio18.08