Table of Contents
Advertisement
MBT1015 rev-C
5.3 LCD Brightness
While you are in the [Setup Menu] display, select [LCD Brightness] from the menu
(Fig. 6). Once entered, the display will show as in (Fig. 7).
To increase the contrast press
Likewise to decrease, press
Setup Menu
Language
LCD Brightness
Set date & time
Company name
Erase Memory
Fig. 6
Once the LCD brightness has been confirmed, press
return back to the [Setup Menu] screen above.
5.5 Set Date and Time
The date and time on the Analysers were set in the Factory during production. Due to
the differences of the Time zone in your Country, you may need to set according to
your local date & time and this can be done by selecting [Set date & time] with
or
key and the press
Setup Menu
Language
LCD Brightness
Set date & time
Company name
Erase Memory
Fig. 8
key and the bar graph will move forward.
key while in this screen.
and the display shows as in Fig.10 below.
Set date & time
23/12/2014
[Enter] to proceed
[Exit] to quit
User's Manual Version 18.08
Fig.7
key to save and it will
16:48
Fig. 9
-
12 -
Advertisement
Table of Contents
