Table of Contents
Advertisement
-
29 -
MBT1015 rev-C
___________________________________________________________________________________
7.1 Battery Test
Same as the previous battery test operations except that you do not require to key in any
particulars as it will update the results with the current ones.
7.2 Starter Test
1. With engine OFF, place
PARK for Automatic then apply the parking brake.
2. Connect the analyser to the battery terminals and the display will light up as
shown (Fig 41) below:
Select Menu
02/04/2014
New Test
Continue Testing
Stored Results
Setup Menu
Fig.41
3. Select [Starter Test] and press
shown in Fig. 43 below.
Fig.43
the vehicle transmission in NEUTRAL for Manual and
Select Test
10:38
Battery Test
Grounding Test
Starter Test
Charging Test
[Enter] to proceed
key will proceed to the next display as
Starter Test
Battery:
12.45V
Crank engine now
until it starts.
[Enter] to proceed
User's Manual Versio18.08
Fig.42
Advertisement
Table of Contents
