Table of Contents
Advertisement
MBT1015 rev-C
7. Continue from the previous test (either Fig. 50, 51 or 52); proceed to the next
step by pressing
Fig.55
Follow the instructions; switch ON all electrical loads (Head Lights, Radio,
Rear Demister, Heater, etc).
Note: Air-Condition (mostly mechanical load) should be OFF as it
sometimes slowdown the idling speed of certain cars while it is ON
thereby affecting the idling speed charging results.
Rev the engine up to 2,000 ~ 2,500 RPM by referring to the dashboard meter,
then press
and release the pedal. The maximum and minimum voltages values will be
captured. (Fig.56)
Normal charging
Volts limit.
key will enter to the display as follows. (Fig.51)
Loading Test
Switch ON all
electrical loads.
Rev engine up to
2,000 rpm. Press
[Enter].Hold on to
this 2,000 rpm for
10 seconds and
release the pedal.
key and maintain the engine speed for about 10 seconds
Loading Test
At 2,000 rpm:
Av.Volts:
13.3V
Max.>13.5V: 13.8V
Min.>12.5V: 12.8V
Press [Enter]
for results.
Fig. 56
User's Manual Version 18.08
Average
charging volts.
Captured Volts
readings
-
34 -
Advertisement
Table of Contents
