Table of Contents
Advertisement
MBT1015 rev-C
15. This Analyser will also takes the temperature of the battery into consideration
when it has detected that the battery condition is marginal (below 75%) and it
will prompt you with the display as shown ( Fig. 34) below:
Fig.34
16. Here it let you to select the surrounding temperature that you are working with
the battery. If the surrounding temperature is for example 15°C, then select
[Above (32°F/0°C)] by pressing
results will show on the LCD display.
3
5
6
To print out the results, just press
start printing.
Interpretations of the above (Fig.35) results:
1. Battery:
Good
A very straight forward display of the final results basing on the evaluation of the
tested condition. 'Good' indicates the battery in good condition. 'OK-Recharge'
means that the battery is OK but needs to recharge as its state of charge is low.
'Replace' indicates that the battery needs to be replaced. If not, the battery will
fail anytime without any warning.
2. Rating:
630 CCA
The battery capacity rated output is normally stated on the label for car
batteries. For other batteries, please refer the chart provided or check on
information provided on the label.
Select:
Below (32°F/0°C)
Above (32°F/0°C)
[Enter] to proceed
key and then press
Battery: Good
Rating:
630 CCA
Measured: 565 CCA
Volts:
12.50 V
Int. R:
4.78 mOhm
Life:
91 %
[Exit] to Menu
key on the Analyser, the printer will
User's Manual Version 18.08
key. Then the
1
2
4
Fig.35
-
24 -
Advertisement
Table of Contents
