Page 1
XAG P100/P100 Pro Motor & ESC Mandatory Maintenance Instructions While the XAG P100/P100 Pro aircraft is operating, it would experience vibrations that might cause the screws securing the Motor connector and ESC to loosen, potentially causing a disconnection of power. The wear and tear of the isolators could have prompted the melting due to heat during the operation.
Page 2
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 2. Use a screwdriver to dislodge the connector shield.
Page 3
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 3. Use a screwdriver to undo the 3 screws securing the connectors and inspect the condition of the isolators and connectors.
Page 4
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 4. Should you find an isolator showing heat-related colour changes, replace it immediately. Also, ensure that each connector is paired with its appropriate...
Page 5
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au Example of heat-induced discolouration...
Page 6
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 5. After the inspection and cleaning of the ESC isolators, substitute any that are worn or display signs of heat-related discolouration.
Page 7
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au...
Page 8
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 6. Clean any residues left on the Motor and ESC connectors and apply contact cleaner when necessary.
Page 9
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au...
Page 10
XAG Australia ABN 56 614 943 118 Unit 5, 11 Jullian Cl. Banksmeadow NSW 2019 +61 (2) 9168 7918 info@xagaustralia.com.au www.xagaustralia.com.au 7. When reassembling, ensure the ESC connectors are accurately aligned with the isolator bracket. 8. Finalize the installation by using a screwdriver to securely tighten the...
Page 11
P100 Motor Connector Isolator (Thick) (02-001-07628) - https://www.xagaustralia.com.au/product-page/p100-motor-connector-isolator-thick P100 Pro Motor Connector Isolator (Thin) (02-002-1168A) – To be released P100 Pro Motor Connector Bracket (Thick Isolator included) (02-001-09012) - To be released IMPORTANT: • Adhering to this maintenance advice from the manufacturer is crucial.