Related Manuals for BODYMAX CF820 Dual Pulley
Summary of Contents for BODYMAX CF820 Dual Pulley
- Page 1 Assembly and Operating Instructions max. 120 kg ~ 180 Min. 256/301 kg L 169 | W 81 | H 212 SEBR3422.01.01 SKU: SEBR3422 + SEBR2532 BodyMax CF820 Dual Pulley...
- Page 2 CF820...
-
Page 3: Table Of Contents
Content GENERAL INFORMATION Technical Data Personal Safety Set-Up Place ASSEMBLY General Instructions Scope of Delivery Scope of Delivery: Weight Stack Upgrade Assembly STORAGE AND TRANSPORT General Instructions TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions Faults and Fault Diagnosis Maintenance and Inspection Calendar DISPOSAL RECOMMENDED ACCESSORIES ORDERING SPARE PARTS... - Page 4 CF820...
- Page 5 Dear customer, Thank you for choosing training equipment from BodyMax. BodyMax is your reliable partner for home and commercial gym equipment. We are specialized in cardio and strength training machines for home and commercial use. Our products are not only strong, durable, and aff ordable but also designed to fi t your personal needs.
- Page 6 ABOUT THIS MANUAL Please carefully read the entire manual before installation and fi rst use. The manual will help you to quickly set up the system and explains how to safely use it. Make sure that all persons exercising with the equipment (especially children and persons with physical, sensory, mental or motor disabilities) are informed about this manual and its contents in advance.
-
Page 7: General Information
GENERAL INFORMATION Technical Data Weight and Dimensions Packaging dimensions (L x W x H) and article weight (gross, incl. packaging) approx.: Box 1: 216 cm x 97 cm x 17 cm 97 kg Box 2: 146 cm x 45 cm x 12 cm 30 kg Box 3 (6x): 27.5 cm x 14.5 cm x 11.5 cm... -
Page 8: Personal Safety
Personal Safety ⚠ DANGER Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective. Particularly aff ected are persons who: have a hereditary disposition to high blood pressure or heart disease, are over the age of 45, smoke, have high cholesterol values, are overweight and/or have not exercised regularly in the past year. -
Page 9: Set-Up Place
Set-Up Place ⚠ WARNING Do not place the equipment in main corridors or escape routes. ⚠ CAUTION Choose a location in which to place the equipment such that there is enough free space/ clearance to the front, the rear and to the sides of the equipment. The training room should be well ventilated during training and not be exposed to any draughts. -
Page 10: Assembly
ASSEMBLY General Instructions ⚠ DANGER Do not leave any tools, packaging materials such as foils or small parts lying around, as otherwise there is a danger of suff ocation for children. Keep children away from the equipment during assembly. ⚠ WARNING Pay attention to the instructions attached to the equipment in order to reduce the risk of injuries. -
Page 11: Scope Of Delivery
Scope of Delivery The scope of delivery consist of the following parts. At the beginning, check whether all parts and tools belonging to the device are included in the scope of delivery and whether damage has occurred. In the event of complaints, the contractual partner must be contacted directly. ⚠... - Page 12 Content of box 1 Part no. Description Qty. Part no. Description Qty. Main Upright Frame - Left Right Shield Main Upright Frame - Right Left Shield Steel Plate Content of box 2 Part no. Description Qty. Part no. Description Qty. Squat Bar Upper Cross Frame Front Top Cross Frame...
-
Page 13: Scope Of Delivery: Weight Stack Upgrade
Scope of Delivery: Weight Stack Upgrade This Dual Pulley Functional Trainer comes with two 72 kg weight stacks. You also have the option of purchasing a weight stack upgrade kit. With the upgrade kit, the weight stacks come in at 95 kg each. ATTENTION If you have purchased the weight stack upgrade kit, make sure to use the top weight plate (38) with preinstalled weight selector (39) and cables (40) from the upgrade kit. -
Page 14: Assembly
Assembly Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given. NOTICE First loosely screw all parts together and check that they fi t properly. Tighten the screws using the tool only when you are instructed to do so. - Page 15 Right side Left side Left Part Right Part H10-17 H10-17 H10-13 H10-13 H10-13 H10-13...
- Page 16 Step 2: Assembly of the Weight Stacks ATTENTION If you are installing the weight stack upgrade kit at a later point, you must fi rst disassemble the entire standard weight stacks and cables. NOTICE This cable machine comes with a standard 2 x 72 kg weight stack. If you have purchased the standard version, use the top weight plate (11) that comes with the main equipment.
- Page 17 Left side Assembly: Weight Stack Upgrade...
- Page 18 Step 3: Assembly of the Cables ATTENTION If you have purchased the standard version, use the cables (26) that come with the main equipment. If you have purchased the weight stack upgrade kit, use the shorter cables (40) from the upgrade kit.
- Page 19 Left side...
- Page 20 Step 4: Cable Adjustment You can recognize the correct cable tension when the top weight plate rests very lightly on the weight stack. If the top weight plate is hanging in the air, the cable is too tight. If the cable is visibly slacking, it is too loose.
- Page 22 Step 5: Assembly of the Shields and Squat Bar NOTICE It is recommended to perform the following steps on one main upright frame fi rst and then continue on the other side. The following steps begin on the left side. Loosen the two washers (W10) and nuts (N10) from the lower cross frame (18).
- Page 23 H10-13 H10-13...
-
Page 24: Storage And Transport
STORAGE AND TRANSPORT General Instructions ⚠ WARNING The storage location should be chosen so that improper use by third parties or children can be prevented. If your equipment does not have transportation wheels, the equipment must be disassembled before transportation. ATTENTION Make sure that the equipment is protected from moisture, dust and dirt in the selected storage location. -
Page 25: Troubleshooting, Care And Maintenance
TROUBLESHOOTING, CARE AND MAINTENANCE General Instructions ⚠ WARNING Do not make any improper changes to the equipment. ⚠ CAUTION Damaged or worn components may aff ect your safety and the life of the equipment. Therefore, immediately replace damaged or worn components. In such a case, contact the contract partner. -
Page 26: Maintenance And Inspection Calendar
Maintenance and Inspection Calendar To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!) after each training session. The following routine tasks must be performed at the specifi ed intervals: Part Weekly Monthly Quarterly Cables Screw connections... -
Page 27: Recommended Accessories
RECOMMENDED ACCESSORIES To make your training experience even more effi cient and pleasant, we recommend that you add suiting accessories to your fi tness equipment. For training equipment like smith machines, weight benches or racks this could for example be a fl oor mat, which makes your fi tness equipment stand more securely and also protects the fl oor from sweat but it could be also additional weights, handles, foot straps for leg exercises or triceps ropes. -
Page 28: Ordering Spare Parts
The serial number of your equipment is unique. It's located on a white sticker. The exact position of this sticker is shown in the following illustration. Enter the serial number in the appropriate fi eld. Serial number: Brand / Category: BodyMax / multi gym Model Name: CF820 Dual Pulley Functional Trainer SKU: SEBR3422 + SEBR2532 CF820... -
Page 29: Parts List
Parts List Name Qty. Name Qty. Main Upright Frame Cable - 732 cm Squat Bar Clip Right Slide Frame Strap Handle Left Slide Frame F50X70mm Inner Cap Front Top Cross Frame Strap Hook Guide Rod Small Pulley Rubber Bumper Big Pulley Weight Stack Plate Ankle Strap Weight Select Pin... -
Page 30: Exploded Drawing
Exploded Drawing CF820... -
Page 31: Warranty
WARRANTY Training equipment from BodyMax® is subject to strict quality control. However, if a fi tness equipment purchased from us does not work perfectly, we take it very seriously and ask you to contact our customer service as indicated. We are happy to help you by phone via our service hotline. - Page 32 Warranty Service Within the warranty period, equipment which develops faults as a result of material or manufacturing defects, will be repaired or replaced at our discretion. Ownership of equipment or parts of equipment which have been replaced is transferred to us. The warranty period is not extended nor does a new warranty period begin following repair or replacement under the warranty.
-
Page 33: Contact
CONTACT TECHNIK TEKNIK OG SERVICE TECHNIQUE & SERVICE �� �� �� +49 4621 4210-900 80 90 16 50 +33 (0) 189 530984 +49 4621 4210-945 +49 4621 42 10 933 �� +49 4621 4210-698 �� �� info@fi tshop.dk info@fi tshop.fr ��... - Page 34 LIVE FITNESS WEBSHOP AND SOCIAL MEDIA The Sport-Tiedje Group is Europe’s largest http://www.powerhouse-fitness.co.uk/ specialist for home fi tness equipment with www.powerhouse-fi tness.co.uk/blog/ currently 70 stores and one of the world’s most renowned online mail order companies for fi tness equipment. https://www.facebook.com/powerhousefi tness.co.uk Powerhouse Fitness is part of the Sport-Tiedje Group.
- Page 36 BodyMax CF820 Dual Pulley...
Need help?
Do you have a question about the CF820 Dual Pulley and is the answer not in the manual?
Questions and answers