Midea MDRS619 Series User Manual page 14

Tips for energy saving
Do not place the appliance near co-
okers, radiators or other heat sources.
If the ambient temperature is high, the
compressor will run more frequently
and for longer, resulting in increased
energy consumption.
Ensure that there is sufficient ventila-
tion at the base of the appliance, on the
sides of the appliance and at the back of
the appliance. Never cover ventilation
openings.
Please also observe the spacing dimensi-
ons in the chapter „Installation".
The arrangement of drawers, shelves
and racks as shown in the illustration
offers the most efficient use of energy
and should therefore be retained as far
as possible.
All drawers and shelves should remain
in the appliance to keep the temperatu-
re stable and save energy.
To obtain a larger storage space (e.g. for
large refrigerated/frozen goods), the
middle drawers can be removed. The
top and bottom drawers and shelves
should be removed last if necessary.
An evenly filled refrigerator/freezer
compartment contributes to optimal
energy use. Therefore, avoid empty or
half-empty compartments.
Allow warm food to cool before placing
it in the refrigerator/freezer.
MDRS619FIE46 (BCD460 wifi说明书).indd 13
Food that has already cooled down
increases energy efficiency.
Allow frozen food to defrost in the re-
frigerator. The coldness of the frozen
food reduces the energy consumption in
the refrigerator compartment and thus
increases the energy efficiency.
Open the door only as briefly as ne-
cessary to minimise cold loss. Opening
the door briefly and closing it properly
reduces energy consumption.
Setting the temperature no colder than
necessary contributes to optimal energy
use. The optimum temperature in the
refrigerator is +7°C. It should be measu-
red as far forward as possible in the top
compartment of refrigerators.
The door seals of your appliance must
be perfectly intact so that the doors
close properly and energy consumption
is not increased unnecessarily.
EN
13
2022-1-11 10:57:22