Table of Contents
Advertisement
Available languages
Available languages
Working
with the Programming
Station
Transferring
programs
between
the PC and the machine
You tan transfer part programs from the PC to the machine
tool. and vice versa.
l
l
l
l
l
l
l
Connect the free serial port at the PC with the data
interface at your machine tool.
When transferring through COM 1:
Start the Programming
Station by entering "ppcoml
List".
When transferring
through COM 2:
Start the Programming
Station by entering "ppcom2 /list".
On the TNC at your machine tool, select the
PROGRAMMING
AND EDITING mode of Operation.
Use the MOD key to select the FE 1 interface mode at
baud rate 38 400.
Press the EXT key on the TNC keyboard.
Use the arrow keys and soft keys to transfer files. The
transferred files tan be found in the C:\TNCPGMS
directory
31
Advertisement
Table of Contents
