Presser Foot Lifter Stopper Position (1) - Horizon Fitness Memory Craft 9480 QC PROFESSIONAL Service Manual And Parts List

Presser foot lifter stopper position (1)

The distance between the presser foot spring release base and the presser foot lifter should be in the range
of 39.4 mm to 39.8 mm when the presser foot is raised with the presser foot lifter.
Presser foot lifter stopper
Presser foot spring
release base
Setscrew B
Setscrew A
Connector
Setscrew D
Setscrew E
LED cover (unit)
Mechanical Adjustment
39.4 to 39.8 mm
Carrying handle
supporter (front)
Cord binder
Setscrew B
View from
the front
Setscrew C
Front bracket (unit)
Setscrew F
Setscrew F
Needle bar
supporter spring
Preparation:
1. Turn the power switch ON.
Press the presser foot lifter button to lower the
presser foot.
Turn the power switch OFF.
2. Raise the presser foot with the presser foot lifter.
3. Remove the top cover (refer to page 1).
4. Disconnect the connector from the face cover.
Cut the cord binder.
Loosen the setscrew A.
Remove the setscrews B (2 pcs.) and C.
Remove the carrying handle supporter (front).
5. Remove the setscrew D and remove the LED
cover (unit).
Remove the needle bar supporter spring.
Loosen the setscrew E.
Remove the setscrews F (2 pcs.).
Remove the front bracket (unit).
35