Setscrew A
(View from the top)
Setscrew B
Cord binder
Replacing Electronic Components
Thread tension unit
Nylon clip
Setscrew C
Thread tension unit
To remove:
1. Remove the top cover, belt cover and the front cover
(refer to pages 1, 2, 6 and 7).
2. Remove the setscrews A and B.
3. Cut the cord binder. Be careful not to cut the cords.
Remove the setscrew C and cords from the nylon
clip.
Remove the nylon clip.
Remove the thread tension unit.
To attach:
4. Follow the above procedure in reverse.
5. Check the upper thread tension (refer to page 24).
15