Cord guide plate
Setscrew A
Replacing Electronic Components
Switching power supply
Power
supply
connector
Setscrew B
Setscrew B
Switching
power supply
Power supply connector
Switching power supply
To remove:
1. Remove the top cover, belt cover and front cover
(refer to pages 1, 2, 6 and 7).
2. Loosen the setscrew A and remove the cord guide
plate.
3. Disconnect the power supply connector from the
switching power supply unit.
4. Remove the setscrews B (3 pcs.) and the switching
power supply.
To attach:
5. Follow the above procedure in reverse.
13