Dc Motor - Horizon Fitness Memory Craft 9480 QC PROFESSIONAL Service Manual And Parts List

Motor belt

DC motor

Setscrew
Setscrew
Replacing Electronic Components
300 gf pressure
7 to 9 mm
DC motor
DC motor
To remove:
1. Remove the top cover, belt cover and front cover
(refer to pages 1, 2, 6 and 7).
2. Remove the setscrews (2 pcs.) and the motor belt.
Remove the DC motor.
To attach:
3. Attach the DC motor.
Tighten the setscrews (2 pcs.) temporarily.
4. Adjust the motor belt deflection to about 7 to 9 mm by
pressing the middle of the motor belt with your finger
with approximately 300 grams-force of pressure.
5. Tighten the setscrews (2 pcs.) securely.
6. Attach the front cover, belt cover and top cover.
14