Control Functions - Hyundai HY2200RV User Manual

2.3 CONTROL FUNCTIONS

AC Circuit Breakers
While the generator is running, the breakers should be in the ON
position.
If the current has exceeded its limits the breaker will automatically pop
out to the OFF position. Reduce the electrical load on the generator and
push the button back to the ON position.
AC Parallel Port (If Equipped)
This socket allows two compatible inverter generators to be connected
for additional power. The parallel kit is an optional accessory, please
contact your dealer, visit us online, or call 1-877-528-3772 to purchase.
DC Circuit Breakers
The DC circuit breaker automatically shuts off when the charging circuit
is overloaded.
If the current has exceeded its limits the breaker will automatically pop
out to the OFF position. Reduce the electrical load on the generator and
push the button back to the ON position.
EcoMode (Economy Control Switch)
Turn EcoMode ON to minimize fuel consumption. In this mode the
engine will dynamically meet the demand of the electrical load and will
automatically go into an idle state if all loads are disconnected.
Before connecting or removing a high load device to the generator, turn
EcoMode OFF until that device has reached running power.
When EcoMode is OFF, the engine runs at full speed.
Output and Overload Indicator
In normal operation, the green output indicator light (READY TO USE)
will remain on.
If the generator is overloaded (producing more than 1700W) or a
connected appliance has short-circuited, the output indicator light will
turn off and the overload indicator light will turn on.
7